Skip to content


MEMOLUB® HPS - group


  • MEMOLUB® HPS is an autonomous refillable lubrication system for single or mutiple point use
  • With its 25 bar ejection pressure, it can be used with 2 to 8 outlets distribution blocks
  • Remote installation up to 10 meters


MEMOLUB® HPS is the leading product in our range.

Its content of 120 cm3 – 240 cm3 or 480 cm3 and 5 daily output programs of 0.3 to 14.4cc make it the most versatile lubricator in our range.

Settings of 1 week to 24 months through MEMO rings (see technical data’s). With its 25 Bar pressure, it can be installed remotely up to 10 meters from lube point or can be used up to 8 points with distributor blocks. Certified ATEX-EX zone 22.

Autonomous and with a 25 Bar expulsion pressure, this model is the most versatile unit in the range.

Frequency setting is regulated by the MEMO.

This MEMO is a unique system to adjust Memolub daily output. MEMO is set once when unit is installed and is then permanently fitted to the lube point. Maintenance personnel does not need to worry of setting anymore, this facilitate greatly lube organisation. MEMO setting is an easy and quick operation (see basic settings table in the Technical data’s part”).

The only replaceable consumables are plastic recyclable cartridges and the set of batteries.

Endless refillable, the environmental impact is limited.

Ideal for all types of industrial applications : bearings, open gears, chains, rollers,…


Technical datas

Cartridge capacity Standard : 120 cm3 / Méga : 240 cm3 / Giga : 480 cm3
Dimensions Standard : 115 x 101 mm / Méga : 147 x 101 mm / Giga : 228 x 101 mm
Battery Pack 4,5 V Alkaline
Temperature exposure range -15° C à +50°C
Direct connection 1/4 inch R


Accessories References Specifications
Kit Splitter Memo grease 2 outlets 1503 Splitter Memo 2 outlets (grease), Bracket Splitter Memo, 2 elbow fitting G1/8 -ø 8mm
Distributor kit 4S 1505 Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet
Distributor kit 6S 1506 Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet
Distributor kit 8S 1507 Installation kit for DB, distributor block, bracket & 2 push-in G1/8 per outlet
Protection Cover 120-240 cm3 2211 Protection against water and dust 120 and 240 cm3
Protection cover 480 cm3 2212 Protection against water and dust 480 cm3


List of available accessories for MEMOLUB® HPS | All accessories


Designation NLGI Class Base oil Temperature range (°C) Viscosity at 40°C Linear Guidance Open Gear Pinion Rack Linear Ball Screw Chain
Viscogen KL23
Oil high temperature High penetration Protection against corrosion
Oil Ester -40°C to 200°C 248.5 v v
Tribol 800/460 – Gudel
Protection against corrosion Wet environment No compatible with other oils
Oil Polyglycol -30°C to +125°C – Peak 140°C 460 v
MEMOMULTI 2 (norme)
Multi-purpose grease Excellent resistance to water washing
2 Mineral -20°C to 150°C 460 v v
EPAP Additivation – Extreme-Pressure – Anti-pitting Very good moisture resistance For high loads
2 Mineral -30°C to 140°C 272
EPAP Additivation – Extreme-Pressure – Anti-pitting Excellent vibration resistance For high loads
2 Mineral -35°C to 140°C 96 v
Excellent oxidation resistance Excellent temperature resistance Do not dry
2 Synthetic -25°C to 180°C 270 v x v x

Copyright © 2022 MEMOLUB® | Design by Generis | Produced with the support of Bruxelles Invest Export