+32 2 559 77 22
User Guide – MEMOLUB® HPS
Precautions
- Do not open the housing: loaded spring;
- Hold MEMOLUB® down during manual checks;
- Leq <70 dB
- Use MEMOLUB® only for greasing machinery;
- Use only lubricant cartridges and batteries recommended by the manufacturer;
Technical informations
Please download the user guide for the following informations:
- Setting and Installation;
- Electric specifications;
- Remote installation;
- Installation with distributor;
- Dimensions;
- Mounting view;
- Temperature exposure range.
Dimensions
Setting and installation
Setting of MEMO through combination of 3 plastic rings:
50mm 
44mm 
38mm
Memolub® HPS Standard 120 cc
| Expulsions per day | Daily output (cc) | Cartridge life (Month) | Memo adjustment |
|---|---|---|---|
| 0.5 | 0.3 | 12 | |
| 1 | 0.6 | 6 | |
| 1.5 | 0.9 | 4 | |
| 2 | 1.2 | 3 | |
Memolub® HPS Mega 240 cc
| Expulsions per day | Daily output in cc | Cartridge life (Month) | Memo adjusments |
|---|---|---|---|
| 0.5 | 0.3 | 24* | |
| 1 | 0.6 | 12 | |
| 1.5 | 0.9 | 8 | |
| 2 | 1.2 | 6 | |
| 4 | 2.4 | 3 | |
| 12 | 7.2 | 1 | |
| 24 | 14.4 | 1/2 | |
* Only with MEMOLUB® HPS
Memolub® HPS Giga 480 cc
| Expulsions per day | Daily output in cc | Cartridge life (Month) | Memo adjusments |
|---|---|---|---|
| 1.5 | 0.9 | 16 | |
| 2 | 1.2 | 12 | |
| 4 | 2.4 | 6 | |
| 12 | 7.2 | 2 | |
| 24 | 14.4 | 1 | |
Replacing cartridge
Open (fingers on ribs)
Prime MEMOLUB®
Insert new battery pack and seal
Squeeze air out of cartridge
Replace cartridge
Close and lock (fingers on ribs)
Direct installation
Prime lube point and remove nipple
Screw in Memo using threadlocker
Install MEMOLUB® on Memo
MEMOLUB® works immediately
Remote installation
Prime lube point and remove nipple
Secure bracket
Install Memo and F1/4 fitting
Screw BSP 1/8 fitting
Cut hose to required size
Insert hose into quick fitting
Insert hose into quick fitting
Install MEMOLUB® on Memo
MEMOLUB® works immediately
Installation with distributor block
Prime lube point and remove nipple
Secure bracket
Install Memo and F1/4 fitting
Screw BSP 1/8 fitting
Cut hose to required size
Insert hose into quick fitting
Insert hose into quick fitting
Install MEMOLUB® on Memo
MEMOLUB® works immediately
Check Function
To check unit: unscrew and screw again
Check regularly
Copyright © 2024 MEMOLUB®
|
Design by Generis
|
Produced with the support of 